COD Digestion Apparatus with glass part The conventional Hot Plate Method has a number of disadvantages. The COD digester overcomes these disadvantages. This digester has a uniform heating without water circulation. The Switch auto off system is its unique feature. After completion of labpro digestion, titration can be done manually or by COD autotitrator Outer cabinet made of mild steel duly Coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminium Block with holes is used to hold 15 nos .COD tubes.( or For 6 tubes ) Aluminium Block is heated to maintain temperature up to 180 °C . Solid state Digital Temperature Controller, labpro appropriate heater & insulation selection assure uniformity in all the samples. How to use – Get the machine cleaned with soft cloth before art of the work. Now insert the plug in the main, switch on and mains pilot lamp glow. Set the temperature on 1Way Heat Switch for providing heat fast and slow to the partials as your convenient. Set the temperature on PID digital control. If desired, use arrow keysto change SV. the temp. UP and down and Press set button The manual of PID is enclosed with this manual but you shouldn’t try to pre set the program for maintaining accuracy of temperature. The PID controlled the temperature before 15 to 20 as the set temperature and temperature will be increase slowly and maintain it on highest point as your requirement Warranty Take care about your body parts when machine rotates. Clean the apparatus after use. Always wear gloves Hot surface : cautions that the top plate is too hot to touch. Do not use this products in a manner other than as stated in the operation conditions of this manual as the protection provided by the equipment may be impaired This product is designed for use in laboratory environments by persons knowledgeable in safe laboratory practices. Always wear safety glasses and other appropriate protective equipments When operating Electric Shock This products must be connected to a grounded power outlet for safe functioning Use only the power cord supplied with the products. The power cord is the device available for full disconnect form mains input. Position the products for use so that the power cord can be easily disconnected without having to move the products. Disconnect the power cord before moving or cleaning the unit Micro-processor PID controller TEMPERATURE CONTROL Temperature Sensitivity ± °C 1 °C or better Spatial Deviation In Temperature ± °C 0.5 or better Readability °C 0.1 Temperature range 5°C above ambient to 250°C (Standard) Temperature Sensor PT-100 Temperature Controller Hydraulic Thermostat/PID controller optional Display LED SAFETY THERMOSTATS Temperature variation Adjustments 3 (With PID Controllers only) Temperature Sensors PT-100 Automatic temperature setting Yes (With PID Controllers only) Adjustable limits Yes (With PID Controllers only) POWER CONSUMPTION Nominal power W 600 - 1250 Nominal voltage V 90 to 270 V AC/DC Frequency Hz 50 Steps to operate the machine: To enter the settings in the menu press MENU KEY. SET TEMPERATURE Press Enter key the display shows the set temperature value . Enter Key SP TEMPERATURE 100⁰C To change the value press PLUS /MINUS KEY. Plus Key SP TEMPERATURE 150⁰C To Come out of this setting press Menu Key Menu Key SP TEMPERATURE Follow the above procedure for all other settings in the menu. To Exit from menu press Swift KEY when screen Yes/no shows Press SET PV: 22 ⁰C SV: 100 ⁰C with alarm is provided to set the digestion period ( Refluxing ). After digestion , analyse the sample with titrimetricmethod . Supplied with Glasswares Temp. Range Above ambient to 150°C.or higher , Resolution 0.1°C, Display Digital 12mm Red LED , Control Digital Electronic temp .Controller , Digital display 12mm Red LED, Heater watts , sensor PT-100, depth ,glass tube 38 mm dia,15 nos (5X3 rows ) OR 38 mm dia , 6nos. (3 X 2 rows) , sample volume 20 ml each. Demo Video Program Manual