Trinocular Microscope for Malaria Test

Trinocular Microscope for Malaria Test Trinocular Microscope for Malaria Test Trinocular Microscope offered is made available by us in 45º inclined finish with 360 degree rotatable trinocular head that provides for optimum user interface. For smooth operations, these also come with co-axial built-in mechanical stage with option of fine vernier graduation, low drive control as well as presence of ball bearing guide ways so as to ensure jerk free smooth slide manipulation through 50 X 75 mm travel feature. Further, the presence of exclusive preset focus lock also helps in preventing damages of valuable slides and objectives. Objectives-------------------4x,10x,45x,100x, Eyepiece----------------10xpairDust cover & tint cloth 2.Initial Set up-----------------------Objectives-------------------Screw the objective into the nosepiece in the consecutive order of the magnification on torrent   already fitted.In your these  are  microscope. Eye pieces-------------------Insert the eye piece into the ocular tubes of binocular head. Filter---------Blue filter be fitted in the part of abbe condenser, below the iris diaphragm.Plug the power cord into a outlet. Switch on supply and keep regulator in  the medium position.Adjust the observacation head to convenient working position. Adjust the interpupillary distance by the tubes keep the graduatrd dioptrice ring at the coinciding with index line. Rotate the nosepiese the lowest power objective 10x is in the viewing position.take the stage position help  of corase focus knob until an image appears. Adjust with fine focus knob to Sharp image.Look at the image and adjust the condenser aperture to the best possible resolution. Examine the specimen.move the slide and gets centred in the field of view.It is wise to always obtain an image with lowest power objective and than going to higer power one stap at a time. When using objective of higher power (N.A1.2) proper focusing  of the condenser.This microscope has a rotate the light intensity from go to low maginifaction  to higer maginifaction.Procedure for using the oil immersion objectives.Rotate the nosepiece low power 10x is the light path.Place one drop of immersion oil on the lighted area of the specimen. Rotate the nosepiece 100x oil immersion objectives. Be cautious the 45x objective should not get in the contact with oil.Since all objectives are parafocal the specimen shall be visible when changed to 100x. Use fine focus knob  to get the best immage.After finish session oil immersion objective, wipe off all traces of oil from the objective with a lens tissues soft cloth moist with lens cleaning  solution.Keep the slide clean of oil to work.After use the microscope cover with discover and keep moisture free area. That all safficant specification as per discussion.feel free to contact for any clarification. Total magnification: 40X-80X-100X-200X-400X-800X-1000X-2000X; Eyepieces: wide field WF10X/18 and WF20X; Objectives: achromatic DIN 4X, 10X, 40X(S), 100X(S, Oil); Viewing head: 45 degrees inclined 360 degrees swiveling digital binocular head; Interpupillary distance: sliding adjustable 2-3/16inch ~ 2-15/16inch (55mm ~ 75mm); Diopter: adjustable on both eyepiece tubes; Nosepiece: revolving quadruple Stage: mechanical stain-resistant double layer size 5-1/2inch x 5-1/2inch (140mm x 140mm), translation range: 3inch x 2inch (75mm x 50mm); Focus: coaxial coarse and fine focus knobs on both sides, rack and pinion adjustment, with tension control; Focusing knob can be locked for observation and transportation; Condenser and diaphragm: Abbe NA1.25 rack and pinion adjustment condenser with iris aperture diaphragm Black palm rest on the base; Illumination: transmitted (lower), replaceable 3W LED light, variable intensity; Metal framework; Power supply: AC 100V~240V 0.2/0.1A 50/60Hz worldwide range