Microprocessor Flame Photometer (Na, K, Ca, Li)

flame photometer price Microprocessor Flame Photometers 1600-G comes with Flame Failure detection and Auto Gas Cutoff Facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after a few seconds.Microprocessor Flame Photometer 1600-G is used for the determination of Sodium, Potassium, Calcium, Lithium & Barium. They use the latest microcontroller technology and advanced engineering techniques to give enhanced accuracy and reproducibility. They have soft touch membrane keys for ease of operation. The results are displayed on the 128 x 64 Graphical LCD with Backlit. The standard model comes with 2 filters (Na, K). Additional filters Ca & Li are optional at extra cost.   In this model, Calibration can be done with up to 25 standards of user choice (5 point for each element) and non-linearity correction is provided through an automatic curve fitting software. Multiple Calibration Curves can be stored in the memory. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of multiple standards once a calibration has been performed. Salient Features:                                                                                        ·              Microprocessor Based with Printer Interface                                                                 ·              Auto Gas Cutoff  Facility                                                                                               ·              Auto Flame Failure Detection                                                                              ·              Five Measurements in Single Aspiration of the sample   ·              Calibration Curve Programmability Using Maximum of 25 Standard   ·              Data Processing Through Curve Fitting Techniques- Least Squares, Quadratic   ·              Multiple Calibration Curves Saving Facility   ·              Printer Attachment Facility   ·              Measurement can be done in ppm as well as in meq                                            ·              Setup Storage Facility (up to 10 setup files)                                                                  ·              Sample Data Storage Facility                                                                               ·              Direct Results in ppm and meq.    ·              Online Help key                                                                ·              Useful for both Medical & Soil Testing Applications     MODE   General   Serum (in meq/l)   Urine (in meq/l)   ppm                                      meq/l   RANGE   Na   :   0-100   Upto 250 meq/l, 1:100 dil.   K   :   0-100   Upto 250 meq/l, 1:100 dil.   Ca   :   0-100   Upto 250 meq/l, 1:100 dil.   Li   :   0-100   Upto 250 meq/l, 1:100 dil.   Ba   :   50-1000       0 – 200  1:100 dil.   0 – 10    1:100 dil.   –   0 – 2      1:5 dil.   –   0 – 250   1:100 dil.   0 – 100   1:100 dil.   0 – 10     1:2 dil.   –   –   Sensitivity   General: Na: 0.5 ppm, K: 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm, Ba: 50 ppm   Filters   Na & K supplied {Ca, Li and Ba are optional at extra cost and can be factory fitted only}   Resolution   0.1 ppm/0.1 meq   Reproducibility   < 1% coefficient of variation for 20 consecutive samples using 10 ppm Na set as                                             maximum standard   Linearity   < 2% error when 3 ppm Na/K and 5 ppm Li are set as maximum standard   Curve Fit Accuracy   < 2% of FS   Display   128x64 Alphanumeric LCD with backlit   Average Time   In-built in software   Flame System   LPG and Dry Oil Free Air   Detector   Silicon Photodiode   Calibration   With up to 25 Standards of User Choice with Curve Fitting Software (5 for Each Element) Multiple Calibration Curves can be stored in the memory   Gas Control   Adjustable with knobs   Flame Failure   Auto Detection   Gas Cutoff   Automatic   Ignition System   Auto Ignition   Atomizer