Microprocessor Based EC-TDS-Temp. Meter

tds meter price Microprocessor Based EC-TDS-Temp. Meter is a solid-state instrument designed to provide the precise conductivity/TDS measurements.  The instrument uses the latest Microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility.  The system has user friendly prompts, which guide you through out the measurement process.     The system has 8 soft touch membrane type keys for ease of operation.  It has the storage facility for 1000 samples, which are retained in the memory even when the system is switched OFF.  Provision has also been provided for attachment of Centronics dot matrix printer so that any of the stored results can be printed.     The instrument is extremely useful for agricultural and soil analysis laboratories, swimming pools, water quality control in boiler feed water, food processing, pharmaceuticals, water works department, fertilizer plants, petroleum refineries, breweries and beverages, water purification plants etc.   Technical Specifications     GENERAL     Parameters   :   EC (Cond.), TDS and Temperature   Display   :   16 x 2 lines Alphanumeric LCD display with backlit   Key Board   :   8 soft touch membrane type keys   Power supply   :   230V ± 10% AC,50 Hz.   Storage   :   Up to 1000 samples, storage in data memory   Printer Attachment   :   Provision for attachment of Centronics dot matrix printer   Display Format   :   Temp. & Cond./EC, Temp. & TDS, Simultaneously in Read Mode   Setting   :   By Soft Touch Keys   Interface   :   Serial RS-232 Port and Parallel Centronics Port   Error Indication   :   Temperature Probe Error   Print Format   :   All Data wise     PARAMETERS     EC/Conductivity   Range   :   0 – 3000 mMhos /cm (mS)   Range Selection   :   Automatic   Accuracy   :   ± 0.5% F.S.  ± 1 digit   Resolution   :   0.01 µS   Cell Constant   :   0.1, 0.5, 1 with automatic recognition facility   Temperature Coefficient   :   Adjustable (0.1 – 9.9%)   Temperature Compensation   :   0-50º C (Auto/Manual)   Reference Temperature   :   25º C     TDS   Range   :   0 – 1000 ppt   Range Selection   :   Automatic   Accuracy   :   ± 1% FS ± 1 Digit   Resolution   :   0.01 ppm   Cell Constant   :   0.1, 0.5, 1 with automatic recognition facility   Temperature Compensation   :   0-50º C (Auto/Manual)   Temperature Coefficient   :   Adjustable (0.1 – 9.9%)   Reference Temperature   :   25º C     Temperature   Range   :   0° to 100.0oC   Resolution   :   0.1oC   Accuracy   :   ± 0.1oC   Sensor   :   Semi-Conductor Type   Standard Accessories           1.   Conductivity/TDS Cell with Cell Constant of approx. 1.0   1 No.   2.   Temperature Probe   1 No.   3.   Dust Cover   1 No.   4.   Instruction Manual   1 No.   5.   Conductivity stand with clamp   1 No.   6.   Main lead   1 No.