labpro Universal LCD Digital Temperature Controller with timer big LCD Display
labpro Universal LCD Digital Temperature Controller with timer big LCD Display
Universal LCD Digital Temperature Controller with timer big LCD Display
Manual Download
SPECIFICATIONS : -
1. DISPLAY TYPE
: 16 x 2 Character LCD
2. STATUS LED’S
: OP1
: Control Output Status
OP2
: Output 2 Status
ST
: Soak Time Status
3.
AT
: Tune Status
Sensor input
: TC:J,K & RTD Pt-100
Analog input
: 0 - 10 VDC, 0 - 20 mA, 4 - 20 mA
Range
: Refer below Table.
Sensor Type
Range
Resolution
Accuracy
Fe-k(J) T/C
0 ~ 760oC
1 oC
}
Cr-AL(K) T/C
-99 ~ 1300oC
1 oC
± 1 oC
Pt-100(RTD)
-100 ~ 450oC
1 oC
Pt-100(RTD 0.1)
-99.9 ~ 450.0oC
0.1 oC
± 0.3 oC
Sampling Time
: 125 msec.
Resolution
: 1°C
CJC for TC
: Built in automatic
LWC for Pt-100
: Built in up to 18E max.
Digital Filter
: 1 to 10 Sec.
4.
Contact type
: N/O, COM
Contact Rating
: 5A @ 250VAC or 30 VDC
Life expectancy
: > 5,00,000 operations
Isolation
: Inherent
5. SSR DRIVE OUTPUT
Drive Capacity
: 12V @ 30mA.
Isolation
: Non-Isolated.
6. FUNCTION
Output 1
: Main Control output (Factory Set)
1) Relay
2) SSR
Output 2
: Programmable
1) Auxiliary control
2) Alarm
3) None
Output 3
: 1)Auxiliary Control
2) Alarm
3) Soak Timer
4) None
Control Action
: ON-OFF/PID (Select)
Control Mode
: Heat/Cool (Select)
7. ENVIRONMENTAL
Operating Range
: 0 ~50°C, 5~90% Rh
Storage Humidity
: 95% Rh (Non-condensing)
8. POWER SUPPLY
Supply Voltage
: 90~270VAC, 50/60Hz.
Consumption
: 4W Maximum.