Bend meter test rig

Bend meter test rig Bend meter test rig The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Experimentation: To demonstrate the use of Bend meter as flow meter. To determine co-efficient of discharge for given Bend meter. Utilities Required: Electricity supply: Single Phase, 220 VAC, 50 Hz, 5-15 amp combined socket with earth connection. Water Supply (Initial Fill). Floor Drain required. Floor Area required: 1.5 m x 0.75 m Mercury (Hg) for manometer (250 gm). Technical Details: Bend meter : Material Stainless steel Compatible to 1” Dia. Pipe. Water Circulation : FHP Pump, Crompton make Flow Measurement : Using Measuring Tank (Capacity 25 Ltrs. (approx.)) and Electronic Stop Watch Sump Tank : Capacity 50 Ltrs. (approx.) Control Panel Comprises of : Standard make On/Off Switch, Mains Indicator, etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel. The whole set-up is well designed and arranged in a good quality painted structure.